
Lubricant & Fuel
EquipmentWe have teamed up with some of the market leaders in the UK to supply the FULL range of lubricant & fuel products. -
-
-
- Nozzles & Hoses
- Hand Pumps
- Lubrication/Dispensing Equipment
- Drum Equipment
- Filtration
- Flow Meters
- Electric Pumps
- Fuel Tank Equipment
- Heating Oil Equipment
- Signs & Labels
- Sealants
- Compounds
- Absorbents & Tools
- Forecourt Construction Equipment
all at very competitive prices and immediate delivery local or nationwide.
A small selection of our products are listed below but if you have any enquiries please do not hesitate to contact us for an immediate quotation.  |
- Robust nutating disc flowmeter showing up to 999 litres
- Suitable for use with most fuels, light oils & other liquids
- 19 - 75L/min. 1” BSPF ports. 10:1 pulser available
- Accuracy of +/- 2% with adjustable calibration
- Aluminium housing & cover
- 6 digit non resettable totaliser
- Front face can be rotated in 45 degree increments
- Max. pressure 50 psi (3.5 bar)
- Integral inlet strainer
| | |
- Samoa & Mcnaught grease guns available from stock
- Universal pumps to be used with 400 grm grease cartidges or with bulk grease. Maximum working pressure 300 bar.
| | 
|
- Greasing pumps available from stock. Air operated Pumpmaster range for high pressure greasing or manual operated pumps
|
 |
50 or 70 l/min pump mounted on a bracket for wall or tank mounting. The unit includes a 220 V diesel pump with on/off switch and 1.8 m cable, wall bracket, 4 m delivery hose, aluminium nozzle and a three digit meter, flange mounted to the pump. Fluid inlet connection: 1” BSP (F). Meter valid for non commercial applications only.
| | | |  |
- This ZVA nozzle is for use on aviation fuel dispensers
- Suitable for use with Avgas, Avtur, Methmix & De-icer
- 1” BSPF swivel inlet
- Fitted with a spout c/w drip cap chain/spring & No 4 guard
- 100 mesh stainless steel screen fitted in spout
- Max. pressure 72 psi (5 bar)
|  |
- Low cost diesel delivery hose, 19mm, 25mm or 38mm bore
- Supplied by the metre or in made up hose assemblies
- Assemblies have brass hose tails threaded BSPM taper
- Ends held in place with stainless steel machine bands
- Nylon reinforcing. Not electrically bonded
- Max operating pressure on 25mm = 50 psi (3 bar)
|  |
- Forecourt Equipment : UPP Pipework, UPP Fittings
- Sockets, Elbows, Tees, Reducers, End Caps, Flanges, Gaskets, Termination, Accessories
- Tank Chambers & Under Pump Sumps, Entry Boots
- Manway Covers, Pump - Vent & Fill Mounting Frames, Spill Manway & Inspection Well
- Shut Off/Check Valves, Shear & Under Pump Valves
- Flexible Connectors & Sump Hoses, Flange Kits, Under Pump Flex Connectors & Spares, Suction Deflectors & Bushes
- Overfill Prevention Valves, Overfill Cage & Fill Nipple, Vapour Recovery Components
- Fill Point Couplings & Caps, Fill Point Adaptors & Caps, Galvanised Pipe & fittings
| | |
For all equipment enquiries
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
|
|